We’ve all likely encountered dampness and mold on the walls of our homes at some point in our lives. However, we may think it’s not so dangerous that it’s occupying a certain area of our home. But far from thinking this way, each case is different and should be measured individually by a professional.
Generally, when we spot a problem on the walls, we act urgently by cleaning and painting them to make them look like new. However, the truth is that over the months and years, moisture returns, destroying the rooms of the house.
Below we discover a series of practical recommendations for the definitive solution to this problem:
Talcum powder to get rid of moisture
Although it may seem strange, talcum powder is considered as a faithful ally when it comes to fighting humidity. Think about how a little talcum powder can get rid of moisture from your sneakers or shoes, and it can also help fight mold on walls.
To do this, simply dampen the talcum powder on the wall and then massage it with a cloth so that it invades.
Repeat the process several times to make it more effective until all traces of moisture are eliminated.
Eliminate mold with bleach
In this case, the solution is curative, because with this method the mold will be completely removed but the humidity will still keep inside the walls.
- We start by blending one part bleach with one part water, then pour it into a spray bottle.
- We also make sure to wear rubber gloves, safety glasses, and a mask. Finally, we grab a brush, spray, and scrub vigorously.
- We must be patient because it will take time. We must do it a little every day or week, as the smell is very strong and can even make us dizzy.
Get rid of mold with hydrogen peroxide
Another alternative product that can help eliminate mold is hydrogen peroxide, but it’s best used on smaller stains, as it requires a little more work.
- Simply soak a cloth in hydrogen peroxide, apply it to the mold, and let it sit for 15 minutes. Then, apply thoroughly until the residue comes off.
This product also demands you to wear gloves and a protective mask and take care to ventilate the environment. - Do not allow children to enter the room during the procedure.
Remove mold with water, vinegar and alcohol
- For a more homemade mix that won’t discolor your wall, there’s a simpler method.
- You can combine warm water with 1 cup of vinegar and 1 cup of alcohol. When blended well, they will diminish the mold, get rid of the stain, and boost cleaning.
Eliminates moisture by correcting the structure
If we want to permanently remove damp and mold in our homes, we’ll need to seek other solutions. For this, it’s crucial to seek professional advice. They’ll measure the home’s structure and help us determine the best solution.
In some cases, if the problem is coming from below, it may be necessary to break the first meter of wall and redo that section with the addition of a waterproofing carpet.
There’s no need to break the entire wall, just the bottom, and little by little. When this part is protected, the top will no longer absorb moisture from the ground.
Other methods to remove moisture that may also work for you
Sea salt is very perfect for fighting humidity, as it presents as a function quite similar to baking soda. It’s also very easy to apply. Simply place containers of sea salt on the floor or wall shelves, and it will start to slowly absorb all the moisture.
Baking soda can also be applied in the same way as sea salt, simply by placing a few containers near the damp area on the walls and you’ll see results in no time.
Tea tree oil is also a good trick for removing dampness on walls. To do this, simply blend two tablespoons of this oil with two cups or gourds, mixing the ingredients well, and then use to damp areas.
